Using a rubber scrubber, sand the plate all over to remove imperfections including the seam lines. Once sanded, wipe over the plate with a damp sponge to remove excess dust. Trace the design by placing the clay carbon on the greenware, then position the pattern on top and then trace over the design with a pencil.
Step Two
Using Black French dimension outline all the iris design. Work quickly to get thinner lines.
TIP: Flip off the nib on top of the French Dimensions bottle and then stir the contents inside with a thin paint brush handle to get a smooth paste.
Bisque fire to cone 04.
Step Three
Painting (Glazing) the design
Wipe the piece over with a damp sponge and glaze the back of the plate with 2 coats of Envision Glaze Clear (IN1001). On top of the plate paint 2 even coats of Envision Glaze Clear (IN1001) around the outside of the iris pattern.
Referring to the picture apply 3 coats of the following glazes
Envision Glaze Bluegrass (IN 1036) to the leaves and stems
Envision Glaze Orchid (IN 1012) to the petals
Envision Glaze Sun Yellow (IN1003) to the stamens
Apply in a dabbing motion, one coat of Envision Glaze Pumpkin Yellow (IN1781) over the stamens.
Glaze fire to cone 06.
This project was supplied by Ceramic Haven who holds classes in ceramics and mosaics. For more information visit www.ceramichaven.com.au
